Washer Problems? Three Things to Check Before Calling the Appliance Repair Service

If you have a modern washing machine, there are a lot of things that can go wrong with it. These machines have circuit boards that control the different functions of your washing machine. This can make it difficult to diagnose problems. While some repairs may require the help of a repair technician, there are also some simple fixes to common problems. Here are some things that you will want to check with your washing machine before calling the appliance repair service:

1. Make Sure the Water is Turned On at the Valve

It may seem stupid, but a major problem with your washing machine can be the valve getting turned off. This is something that many people forget to turn on when they install a new washing machine. Your valve can also get turned off by accident if someone is doing plumbing repairs, or if it is in an area where it can easily be knocked into the off position. If you have a modern washing machine and it is showing error codes, this is something that you will want to check. Sometimes, just turning the water on can get your washing machine working again.

2. Checking the Door and Refitting the Rubber Seal

The door getting jammed can be another problem that causes your washing machine to not work. Sometimes, this can just be from something being caught in the door and not letting it shut. However, if the problem happens continuously, it may be the rubber seal in the door not fitting correctly. It is simple to fix this door problem. If you look at the edge of the door, you will see a collar that holds the rubber in place. Remove the collar and refit the rubber seal to repair the door problem. This is a simple fix that you can easily do yourself with a pair of pliers and a flathead screwdriver. It can also prevent leaks that damage electronics parts.

3. Clearing Out Debris in the Filter Clogging Lines

Debris that gets caught in the lines can be another problem that you have to deal with. This is why there is a filter and drain line at the bottom of most modern washing machines. If your machine is not filling with water or having problems with draining, open the drain cover to access the filter and drain line. If there is water in the machine, use the drain line to drain the water out before opening the filter. There will still be water in the machine, so you may also want to have a few old towels handy to clean up any excess water once you clean out the filter.

These are some of the things that you will want to check before calling the appliance repair service. If you need help getting your washing machine working again and have checked the problems here, contact an appliance repair service, such as House Calls Appliance Repair, to fix your washer or dryer.


Share